• You must confirm the ability to meet or exceed all bid specifications and requirements. • The washer must be a 100% direct replacement of the existing unit. The washer must fit within the space and pit with no modifications required. The washer cannot require any facility utility changes. The vendor will be responsible for any utility modifications to the unit to meet these requirements. o Interior Compartment: 46" wide x 85" high x 92" long o Overall Unit: 86" wide x 104" high x 100" long o Accommodate racks up to 72 inches L x 80 inches H. • The spray system must be able to provide sufficient pump pressure to supply adequate pressure to all the jets 100% of the time. • The washer must be provided with a large in-line self-cleaning screen to filter all recirculated wash solutions, protecting the jets from plugging with debris. The screen should automatically remove debris each time the unit is drained. • The rack washer must use all non-proprietary, readily available “off the shelf” brand name parts and components. Replacement/repair parts must be available locally. The original manufacturer’s name and part number must be provided for each component, eliminating the need to go to the manufacturer for replacement parts while reducing downtime and repair costs. • The rack washer must be warranted to be free from defects in material and workmanship for two (2) years from the time of start-up and training unless otherwise specified. Any defective parts and labor to repair or replace such part(s) shall be provided under this warranty for twenty-four (24) months. This warranty should be included in the bid price. • The washer should have: o Alternate source of steam/hot water to allow operation when building systems are undergoing maintenance or repair. o All Cycle Time and Temperature Set Points Adjustable o Cycle Names User Adjustable o Cycle Lock‐out capability o Monitoring Alarm Condition o Time/Date Display o Ethernet connection for Factory Access and Troubleshooting o Flush Mounted Control Box o A Strip Chart Printer o Sump Heating - Stainless Steel Steam Coil Sump Heating, House Water Temperature Booster o "Reuseable‐Throwaway" Alkaline Detergent System, Heated o "Reuseable‐Throwaway" Acid Detergent System, Non‐Heated o DDCD System ‐ Injected o Feeder Bottle Wash System o Pan Washing System (Machine 8" wider) o 1/3 View Door o Exhaust - Automatic Damper o Hard Copy Manual o A single 10 Hp horizontal pump o A flat obstruction-free perforated floor grating system across the entire load surface to facilitate the loading and unloading of racks and carts. o Utilize only pneumatically operated valves and components. o Electrical connection is 3-60-480 volt.
