Specifications include, but are not limited to: Hard Armor Plates - BDS H4001-1 (or equal); General Requirements: * Model: BDS H4001-1 or equivalent * Type: Hard Armor Rifle Plates * Threat Level: NIJ0101.06 Certified, Level III * Material: UHMWPE (Ultra-High Molecular Weight Polyethylene) * Shape: Shooter's Cut (or SAPI cut, based on end-user need) * Curve: Multi-curve ergonomic design * Finish: Encapsulated with durable water-resistant coating or sealed in thermoplastic/Polyurea * Weight: Not to exceed 7.O Ibs per plate (l0xl2 size) * Size: 10" x 12" nominal * Thickness: Not to exceed 1 inch; Performance Standards: * Must stop the following rounds at minimum: * -.30-06 M2AP (Armor-Piercing), 166 gr at 2,880 fps * - 7.62x51mm M80 NATO Ball * - 5.56x45mm M193 and M855 * Tested in accordance with NIJ0101.06 or 0101.07 draft protocol * Backface deformation: < 44mm; Other Features: * Multi-hit capable (minimum 3 spaced hits of.30-06 M2AP) * Drop tested and environmental stress tested (humidity, heat, cold) * Compatible with standard plate carriers; 2. Soft Armor Side Panels for Cummerbund - Compatible with NU Level 111A; General Requirements: * Type: Soft armor ballistic inserts for cummerbund side pouches * Threat Level: NIJ0101.06 Level IIIA * Material: Woven and/or non-woven aramid or UHMWPE * Construction: Flexible, edge-sealed with RF or ultrasonic weld; Size & Fit: * Custom fit for side cummerbund pouches, dimensions typically 5" x 11" or per system requirements * Thin, flexible, and lightweight (preferably < 1 lb per panel) * Vendor will be available to come on site for personalized fittings of personnel