Excavator Attached Dredge Pump w/Jetting Ring and Pins: Protective steel casing surrounding dredge pump, bearing housing, hydraulic drive Discharge piping and connection flange, complete with required nuts and bolts One set of hydraulic hoses (three hoses, pressure return, leak), connections and hose guide/s Jet water connection Brackets, link pins, linkage, etc. necessary to attach to excavator. To be rigidly attached to excavator and not hanging by chains. Shall be capable of inter-changing several different production heads Seal Pressure Gauge in Cabin: This installation is for the operator to monitor the operational status of the pump’s seal directly from the cabin, enhancing safety and efficiency. All components, hardware fittings necessary for a complete and functioning installation shall be included. Dredge Pressure Hose 8-inch Suction/Discharge Slurry Hose, Gum Lined. (3) Sections, 15 feet length with steel flanges at both ends. Wear layer nominal .355 inch Maximum working pressure 150 psi Securely attached to stick and boom
