BASIC VEHICLE DIMENSIONS Width: Interior 96" Height: Exterior Interior 102” 83.5” Exterior Length: Exterior 13’ 2” 37’ Wheelbase: 193” CHASSIS SPECIFICATIONS TYPE Heavy-duty front engine transit type shall be provided. AIR CLEANER Shall be heavy-duty replaceable type. Shall be mounted outside the passenger compartment with proper ducting to provide adequate engine aspiration. Location of the air intake shall be above the radiator for cleanest possible air. The air cleaner shall be readily accessible for servicing. The air cleaner shall include a progressive locking air restriction indicator. Donaldson replaceable single-stage air cleaner or equal. ALTERNATOR Shall be Leece Neville 12 volt of not less than 200 amps and provide at least 50% of the rated charge at engine idle. Mounting shall be heavy-duty 2-leg type as specified in SAE-J-80. AXLES Front: Detroit 13,200 lb. capacity integral arm steer axle. Forged steel I-Beam type with greasable tie rod ends and 80" nominal track width. King pin size 1.794" diameter with sealed bushing and tapered roller thrust bearings. Turning angle shall be minimum 45 degrees to allow maximum maneuverability. Rear: Detroit 19,000 lbs. capacity single reduction, spiral bevel gearing shall be provided. BATTERIES Provide two (2) 12-volt conventional, BCI Group 31 batteries with threaded stud terminals. Batteries will have minimum 760 cold cranking amps each at 0 degrees Fahrenheit; 200 minutes minimum reserve capacity at 80 degrees Fahrenheit. Separate battery for generator shall be provided.
