1. POLYMER MODIFIED MASTERSEAL – READY TO USE (PMM-RTU): Group 2 on the Pricing Sheet 1.1 Material Specifications: Material must meet the minimum as noted below: A. Emulsion: • Weight/gallon @ 77°F (Ready to Use) ASTM D 2939.07, (Min. 10.5lbs.) • Asphalt Content by Weight% ASTM D 2939.21, (Min. 18%) • VOC Content by Volume % ASTM D 244-89, (<3%) - Maricopa County Air Pollution Control Regulations- Rule 340 section 301.3 • Fine Aggregate Content by Weight, (Min. 34%) • Polymer Latex Content by Volume, (1.8%) B. Residue: • Residue by Evap. % (Solids as Manufactured) ASTM D 2939.08, (Min. 50%) C. Performance Based Testing: • RESISTANCE TO HEAT ASTM D 2939.14, (PASS) - No sagging or slipping beyond the initial reference line after 212°F exposure for 2 hours. • RESISTANCE TO WATER ASTM D 2939.15, (PASS) - No blistering or re-emulsification after 24- hour submersion in water. • WET FLOW ASTM D 2939.19, (PASS) - No flow beyond initial reference line. • DIRECT FLAME TEST ASTM D 2939.20, (PASS) - No continued combustion or slippage and run-down. • WET FILM CONTINUITY ASTM D 2939.22, (PASS) - A uniformly homogeneous consistency. • RESISTANCE TO KEROSENE ASTM D 2939.25, (PASS) - No evidence of leakage of kerosene, loss of adhesion and discoloration of tile. • WET TRACK ABRASION TEST (1 hr.), grams/sq. ft. loss ASTM D 3910, (<10) • WET TRACK ABRASION TEST (6 day) grams/sq. ft. loss ASTM D 3910, (<10) - Calculated weight loss, percentage of original volume. • ACCELERATED WEATHERING TEST ASTM G 154, (1000 hrs.), (PASS) - UVA-Weatherometer no cracking, chipping, surface distortion or loss of adhesion. No color fading or lightening TECHNICAL SPECIFICATIONS – GROUP 2 (POLYMER MODIFIED MASTERSEAL)
