Specifications for Liquid Calcium Hydroxide to be Fed in a CAL~FLO® LIME SLURRY SYSTEM • The Supplier shall certify only finely ground air-classified hydrated lime is used for preparation of the slurry product, having no polymer or other additives. • Calcium hydroxide shall be a stabilized 30% aqueous suspension and manufactured using high impact micro-particle dispersion. Porta-batch mixing is not acceptable. • Slurry product must be Standard NSF/ANSI/CAN 60 Certified as a drinking water additive. • Slurry solids shall have 99.9% or higher passing 100 mesh screens. • Delivery tankers shall be solely used for shipping calcium hydroxide slurry and equipped with a flushing system to avoid spillage at the completion of off-loading. • Delivery drivers shall be responsible for adding precise amount of dilution water and request inspection by the on-site operator at the end of each delivery. • Deliver drivers shall be trained in CAL~FLO® system inspection, and able to perform on-site repairs approved by equipment manufacturer. • Supplier shall stock and sell CAL~FLO® or approved equal feed pump tubes, cater tubes, and seats for annual service or incidental repairs to the client, as needed. • Supplier shall stock spare parts for the CAL~FLO® system such as caters, pinch valves, level indicators, circuit boards, electrical components, PLC, feed tubing, mixer motors, etc. Parts may be CAL~FLO OEM or approved equal...
