General Requirements The intent of this bid is to provide rainwear required by the Birmingham Water Works Board for a one-year period. The Board reserves the right to extend this contract annually for up to two additional years upon mutual consent of the Board and the successful bidder All items listed and required on the attached “Bid Form” must comply with the following specifications. Rain Jacket- Tingley #J23122 Jackets are to be printed with 2” high blue letters “BWWB”. Jackets are to have underarm and back vents. Fabric: Fluorescent yellow-green material is 4 oz/yd2 Polyurethane on 150D Polyester Seams: 100% Waterproof, double-needle stitched, and taped Hems are single-needle stitched Safety: Reflective tape ANSI/ISEA 107 compliant 2” silver glass bead tape Closure Type: Storm fly front with 4 snaps Pockets: 2 patch pockets with flap and hook and loop closure Construction: Jackets are full-cut shoulder construction with 90o sleeve-to-body angle Logo: BWWB logo is on the upper back of the jacket. PMS 294 Royal Blue (Logo attached.) Compliance Standards: ANSI/ISEA 107 Type R Class 3
