A. Disassemble pump and remove rotating element. Bidder to provide a Total Indicated Run-Out reading of the rotating element before removal of rotating assembly, inboard and outboard bearing and wear ring. B. Transport pump rotating element to Bidder's facility for repairs. Bidder has the option to remove the entire pump and not just the rotating element, but if this is the elected approach, any additional costs will be the responsibility of the Bidder. No additional charges will be accepted by the Village. C. Clean rotating element and associated parts and inspect for damage or additional wear. Clearances must be brought back to original OEM specification. Replace impeller ring and case rings. D. Replace mechanical seal wear sleeves (2) on the impeller shaft. E. Replace both mechanical seals. Replacement seals must have tungsten carbide stationary faces, carbon rotary faces and all stainless steel construction. Seals must be type 8 style, as manufactured by John Crane, Chesterton, Hydro Aire, Borg-Warner (or approved equal).
