1. Provide a summary table listing all design build project projected outcomes. Refer to Exhibit A, “Potential Scope” for general categories of energy conservation measures to incorporate in your response. Your Base Bid shall be premised on the Potential Scope identified in Exhibit A. You may also propose Voluntary Alternates. The summary table shall include the following for each measure individually, including for your Base Bid and separately for any Voluntary Alternates. a. The cost of each measure, including all design, labor and material costs for the same b. Annual net energy savings c. Annual net operational savings d. Any applicable utility rebates e. Calculated simple payback 2. Identify and describe all proposed energy conservation measures listed in the table above. Provide a detailed description of scope of the work to be performed for each outcome, including quantities, sizes, capacities, etc., as applicable. Also clearly indicate any related items or existing equipment that is to remain. 3. Provide in table form, a detailed breakdown of the energy performance savings to be derived for each energy conservation measure, including the following: • Annual guaranteed electrical, natural gas, water, and/or other utility savings. Both usage savings and the calculated monetary value of those savings shall be listed. • Guaranteed energy savings and operating and maintenance costs savings resulting from each energy conservation measure and the project as a whole. Totals should match those listed in the summary table above. 4. Describe the engineering methodology and calculations used for each of the proposed energy savings measures. Also provide detailed calculations to substantiate any proposed operating and maintenance cost savings. 5. If the Bidder proposes a maintenance program, provide detailed information regarding the annual costs, scope of services provided, and terms of contract. 6. Provide a table identifying a summary of all warranties by equipment type, including manufacturer’s warranty coverage and duration that may exceed the overall project warranty term. Identify whether the product may qualify under the Buy America Act. 7. Provide a project schedule for implementation of the stated scope of work.
