Diploma Cover Specifications A. Size • To fit diploma, inse11 measuring 9" x 7". B. Cover Material • .010 Morocco or calf grain leatherette in color selected by school. C. Cover Board • .060 warp resistant Davey Board or equivalent. D. Padding • 1/8" polyether foam laminated to .015 felt protection sheet on side exposed to cover material. The padding MAY NOT be exposed to the cover material. E. Panel • A sharp single line panel is embossed ¼" f rom the edge of the cover, on upfold style only. Panoramic style with hinge at the left omits panel. F. Lettering • The school name shall be stamped on the cover. The style and color shall be selected by the school. G. Linings • The lining shall consist of two pads sized to fit the diploma insert measuring 9" x 7". • Material - 100% acetate moiré (for taffeta) laminated to 40-lb. white backing sheet. • Comer pockets - Four ¾" vat dyed satin comer pockets. The corner pockets are located on the lower lining on the top- fold style, or the right lining on the panoramic style. • Lining Board - .040 binders cloth board. H. Hinge • .010 Morocco or calf grain leatherette. Same material as cover. l. Cover Construction • Bottom to top fold, hinge at top, rigid cover. • The entire back of the cover is glued and anchored on the cover board. All four corners MUST be neatly turned and the linings MUST be securely and neatly glued in place. J. Certigard • A clear plastic certigard will be provided to protect the insert. K. Envelope • A clear plastic envelope will be provided for each cover. The envelope should be open on end with no flap.
