A. Overhead Doors: i. Inspect the conditions of the door sections ii. Inspect and adjust door alignment iii. Inspect and lubricate springs C. Gates: i. Inspect the conditions of the gate sections. ii. Inspect and adjust door alignment. iii. Inspect and lubricate rollers and bearings. iv. Adjust and lubricate springs. v. Inspect springs for secure mounting. vi. Inspect and tighten hinges and hardware. vii. Inspect cables for wear and damage. viii. Inspect locks for proper operation. ix. Inspect weather strip for wear and damage. x. Inspect track, fasteners, and hardware. xi. Inspect and lubricate chain hoist. xii. Inspect safety edges and coil cords. xiii. Inspect gearbox. xiv. Inspect motor. xv. Inspect and adjust belts. iv. Inspect springs for secure mounting v. Inspect and tighten hinges and hardware vi. Inspect cables for wear and damage vii. Inspect track, fasteners, and hardware viii. Inspect and lubricate chain hoist ix. Inspect safety edges and coil cords B. Operators: i. Inspect and adjust limit switches ii. Inspect and adjust belts iii. Inspect and lubricate roller chain(s) iv. Inspect and adjust brake(s) v. Inspect and adjust clutch vi. Inspect operation mounting vii. Inspect and test disconnect viii. Inspect and tighten all Sprockets
