1. Demo and replace all damaged; or supply and install any missing siding, channel, louvered vents and accessories. Remove existing shutters on the gable end of the home and use color matching caulk on holes. All new shall match existing. 2. Remove and dispose of satellite dish(es). Caulk screw holes or repair any damage to the roof. 3. Remove and dispose of dish and any cable wires secured around the exterior of the house. 4. Demo and replace all damaged; or supply and install any missing aluminum soffit and fascia covering. All new pieces to match existing. 5. Demo and replace all foundation flashing. Match existing color. 6. Supply and install black dirt to repair grade around the perimeter after flashing replacement. 7. Remove and dispose of satellite dish(es). Caulk any holes in roof sheathing after removal. 8. Pressure wash and clean all siding and exterior surfaces. While being careful not to damage the shingles, scrub off/ remove moss on roofing surfaces. Bid Alternate #1: Provide added cost to reroof, as follows. Tear-off and replace existing roofing. Include ice & water installation, replacement of underlayment, drip edge, ridge vent/ attic exhaust vents and any other accessories which may be present. Timberline shingles selection: charcoal. 9. Demo all existing exterior wall mounted light fixtures. Supply and install new Patriot Lighting dualux LED dual head motion sensor exterior fixtures model: E9201WH. Supply and install new LED bulbs in the existing surface mounted light fixtures on the porch ceiling. 10. Remove peeling finish on window sashes and frames. Carefully sand then hand paint sashes and frame with an exterior white matching
