Furnish and deliver (6) 30’ wood utility poles to the site. The poles shall be Penta or CCA treated. The existing poles are 30’ in height. Contractor to provide necessary equipment to install, anchor, and secure the pole extensions onto existing 30’ poles per ANSI standards. Contractor to install the extensions to the existing poles with galvanized screw anchors and any other necessary hardware and anchor the extension poles to the ground per ANSI standards, anchored at least 8’ into the ground. The overall height of the new netting/pole system will be 55’ from surface level. Contractor to provide necessary hardware and cables onto poles for the netting installation. Eyebolts, bolt clamps and staples shall be galvanized steel. Contractor to furnish, deliver to the site, install and secure 25’ tall X 250’ long net to cables and poles. Netting shall be #18-100% Twisted Knotted Nylon Golf Backstop net Heavy Duty Dupont Grade 7/8" Mesh Square Hung UV Protected & weather treated with slight tar finishing and sewn in borders. Wind lines are to be placed every 25 feet. Wind lines shall be fastened to a 5/16 coated cable. The new netting shall overlap the existing netting by at least a foot to prevent any gaps...
