● Item 1.1: Spring Garden ES ThermalRite by Everidge Walk-In & Turnkey Installation Qty: One (1) LOT o Model: Custom Fabricated Indoor Walk-In Cooler & Freezer Combination o Walk-in assembly shall consist of one (1) refrigerator, and one (1) freezer compartment: 24’ 0" Wide x 9’ 0" Long x 9’ 1-1/2” High overall exterior dimensions. ▪ Freezer Dimensions: 13’ 6” x 9’ 0” x 9’ 1-1/2” ▪ Cooler Dimensions: 9’ 6” x 9’ 0” x 9’ 1-1/2” ▪ Final dimensions shall be confirmed onsite by installation contractor as per the site conditions and detailed herein. o Walk-In Cooler Panel Construction: ▪ All panels shall be constructed of prefabricated sections joined together to form a room of exact dimensions as shown on the contract drawings. To assure perfect alignment and maximum strength, corner panels shall be 90-degree angles. The ceiling and floor panels shall cam lock to the wall panels. ▪ Panels shall consist of interior and exterior metal pans precisely formed, framed with tongue and groove High-Density Hard-Nosed Foam Rail with not less than 2 lbs. per square foot density and thoroughly checked for uniformity and accuracy. The metal pans or “skins” shall be placed into steel molds and liquid urethane injected into the assembly. Urethane shall be UL approved foamed-in-place and, when completely cured, binds tenaciously to the metal skins to form a rigid 4” thick insulated panel. To ensure tight joints, panel edges must be tongue and groove with a flexible vinyl gasket on the interior and exterior edges. Gaskets shall be resistant to oil, fats, water, detergents, and sunlight and must be NSF approved...
