1. Frame a. Heavy Duty Construction b. Reinforced tubular steel design 2. Minimum Dry Weight a. 809 pounds minimum dry weight 3. Engine a. Shall have a piston displacement of no less than 1868cc. b. Shall be equipped with electronic sequential port fuel injection. c. Shall be air and oil cooled with a fan assisted oil cooler. d. Shall be designed to ensure that any vibration frequencies and magnitudes will be minimal. e. Engine and transmission shall be isolated from motorcycle frame via a rubber mounting system. f. The engines computer shall meet Maryland emissions standards and not calibrated to meet California standards which may cause the motor to overheat. g. Units shall meet all applicable Federal and State emissions standards at the time of manufacture 4. Transmission/Clutch a. Transmission shall be the latest design, manual type, having no less than six (6) forward speeds. b. Clutch system shall be Mechanical adjustable, ten (10) plate design, wet. c. Primary drive, double-row chain, 34/46 ratio 5. Brakes a. Anti-lock disc brakes shall be provided. b. Front brake shall have dual floating discs with 4 piston calipers. c. Rear brake shall be single disc with 4 piston calipers. d. Brakes shall be relatively free from heat fade. e. Rear brake pedal foot operated with rubber pad 2 x 4 . f. All friction parts shall be asbestos free
