A. Contractor shall provide two complete cleanings as described below, one in the morning and one in the afternoon. *This is to include scrubbing floors and walls (especially grout) with brushes. 1. Vacuum/sweep floor - dust walls and ceiling for cobwebs. Use damp or microfiber cloths wherever possible. 2. Empty and clean trash receptacles, replace liners (required) as needed to maintain sanitary conditions. 3. Refill dispensers, soap, toilet tissue, hand towels, etc. 4. Clean toilet partitions, dispensers, waste receptacles and doors. Greasy film shall not be left on stainless steel surfaces and/or composite surfaces. They shall be wiped dry with a microfiber general purpose cloth after cleaning. 5. Disinfect/clean toilet bowls on the inside and all surfaces on the outside. 6. Disinfect/clean toilet seats, top, bottom and hinges. 7. Disinfect/clean urinals on the inside and all surfaces on the outside. 8. Clean lavatories. DO NOT use abrasive cleaners on composite sinks. 9. Clean hardware (push/pull plates, bars, doorknobs, handles, kick plates, etc.). 10. Clean mirrors. DO NOT use acid, alkali, abrasive or concentrated ammonia based cleaners. Apply cleaner to cloth, not to mirror to avoid puddling at mirror edges. 11. Mop floor using clean water. DO NOT reuse mop water. Change mop heads regularly. 12. Clean walls, especially under hand dryers and soap dispensers, and wipe down. 13. Refill deodorant container (or use spray deodorant). 14. Remove graffiti. 15. Sanitize/clean water cooler. 16. Replace napkin bags and use disinfectant on container. DO NOT reuse napkin bags. 17. Disinfect/clean baby changing stations/tables. 18. Keep doors and display case fronts clean. 19. Clean all air grills, returns and vents. B. Hourly Follow-up and Spot Check Cleanings (on the hour and at the end of each shift): 1. Vacuum/sweep as often as needed to maintain litter-free floor. 2. Empty receptacles. 3. Refill dispensers, soap, toilet tissue, hand towels, etc.
