● Playground 1: Full Poured-in-Place Surface Replacement: Approximately 3200 sf. ● Demo and dispose of existing poured in place rubber surfacing, Replace with Surface America's PlayBound Poured-In-Place or equivalent,subject to approval by a District Representative. The replacement surface shall be poured to match the existing thickness (thicknesses are subject to a nominal variation), with the colored top coat applied to a minimum thickness of ½ inch. See link to America's PlayBound Poured-InPlace specifications and instillation instructions below. ● Approximately 3200 sf. contractor to verify. ● Playground 2: Poured in Place surface repairs and roll coat: ● Repairs to the poured-in-place surface shall be made to match the existing surface in both texture and appearance using the same products specified in the full surface replacement. The roll coat shall be Trassig’s Rebinder or an approved equivalent. Refer to Trassig’s Rebinder specifications and installation instructions for detailed requirements and proper application procedures. Repair and installation instructions below. ● Approximately 2800 sf. contractor to verify. ● Playgrounds 3 & 4: Poured in Place surface repairs and roll coat: ● Repairs to the poured-in-place surface shall be made to match the existing surface in both texture and appearance using the same products specified in the full surface replacement. The roll coat shall be Trassig’s Rebinder or an approved equivalent. Refer to Trassig’s Rebinder specifications and installation instructions for detailed requirements and proper application procedures. Repair and installation instructions below. ● Approximately 2100 sf. contractor to verify.
