1. The stockpile site is located on US26 (047) at MP0.48 on the north side of the highway, just before the intersection with US101 (009). 2. Contractor shall install approximately 740 LF of new “Type CL-6” (6’ chain link fencing, see detail RD815) around the site. The new fence is to be installed a minimum of 1’ inside of the painted/staked locations in the field. Any questions about the layout or limits of the work not clearly defined here or in the scope of work (SOW) document can be answered by the Project Manager listed above. 3. The installation of this fencing is intended to secure the existing stockpile site, and the work also requires the installation of two 20’ single swing gates 80’ apart as shown in the SOW document. 4. The contractor may use the stockpile site as a material and equipment staging area for the duration of the project. 5. Brush and material removal along the proposed fence line necessary to install new fence will be removed by the Agency. The dirt windrows and boulders will be removed by the Agency as well. 6. Contractor to retain and protect existing property corners.
