1. Demolish, remove and dispose of materials at a Vermont or New Hampshire-licensed disposal facility. This includes the building, concrete slab, frost walls, footings and all site debris. 2. File the demolition notification plan with the Vermont Department of Health and EPA. 3. Utility services have been disconnected; however, contractor must verify and be responsible for notifying utilities prior to demolition. 4. File for Abatement Permit through the Vermont Department of Health. a. Prepare and submit hazardous building material abatement plan for review and approval b. Implement abatement per the approved plan. c. Manage inspection process of structure and surrounding area with Vermont Licensed Asbestos Abatement Inspector. 5. Prior to demolition, remove and dispose of all landfill banned items as identified by the State of Vermont, Waste Management and Prevention Division. 6. Provide barrier safety fencing during all demolition activities and secure the area to prevent access by others throughout the project. 7. Install track-out control using a minimum of 20ft wide by 50ft long 2-4 inch stone from site to edge of gravel entry road. 8. Backfill building site and level grade, accounting in proposal for on-site material to be used. 9. Spread 3 inches of topsoil, seed with conservation mix and mulch site. 10. Re-grade, install and compact 2” of three quarter hardpack on existing park entrance road from track-out to route 5 entrance after completion of demolition.
