Steel wheels must be reconditioned and have a minimum of 1” thick steel wrapper material installed on the inner and outer edge of the wheel and meet OEM new wheel specifications. Wheels shall have new cylinder extensions, wear bars and sidewalls, wheels shall be painted. Cleats shall have a Chevron pattern and be made with HDT cast steel, with a minimum 7.5” height, made with a minimum 400 Brinell hardness and be welded to the steel wheel compactor drum. Cleats shall be one piece. Cleats shall have a minimum of .25” tungsten carbide hard-facing or equivalent on end of cleat for longer wear life. Front wheels must contain weld-on (7.5” wedge type cleats or equivalent). Rear wheels must contain weld-on (7.5” wedge type cleats or equivalent). Must be (2) front wheel drums and (2) rear wheel drums. Cleats shall be compatible with the Caterpillar 836H cleaning/striker bar system. Front and Rear wheels must be fitted with a weld-on rolling wire guard
