SPECIFICATIONS SHALL MEET OR EXCEED THE FOLLOWING: a) Line 1 - 20 Foot Custom Built Aluminum Boat i) Custom-built 20-foot x 62-inch (20’ x 62”) center console aluminum boat. ii) Example: Uncle J Center Console 20 x 62, GatorTrax GT or TPWD approved equivalent. iii) Quantity: Six (6) iv) Requirement: Boat must conform to 33CFR, Code of Federal Regulations (Part # 183) and adhere to the American Boat & Yacht Council (ABYC) standards. v) Length: Approximately nineteen (19’) to twenty (20’) feet with a twenty (20”) inch Hunt Deck. vi) Beam: Approximately sixty-two (62”) inches. vii) Sides: Height approximately twenty-one (21) inches, to include an eleven (11) inch catwalk that does not extend past the console and angled to allow movement between console and catwalk. viii) Color: shall be determined by TPWD upon award, from manufacturer’s standard colors. ix) Fuel type, Tank and Storage: (1) Fuel Type: Gasoline. (2) Tank Capacity: twenty-five (25) gallons. (3) Fuel water separator is to be installed in the fuel line. x) Battery: One (1) marine battery with battery selector switch and holding tray. xi) Navigation Lights: (1) Side front and rear all-around light emitting diode (LED) (2) United States Coast Guard (USCG) approved navigation lights need to be installed in accordance with USCG requirements...
