Address # 1: 2814 Concord St Install 1in. x 6in. x 8ft Pressure-Treated Pine Dog Ear Fence Picket Install 2in. x 4in. x 8ft Ground Contact Pressure-Treated Lumber Use existing metal poles with new fence hardware, use necessary brackets or clamps specifically designed for metal poles, allowing you to securely fasten new fence panels Install if necessary 4in. x 4in. x 8ft Ground Contact Pressure-Treated Southern Yellow Pine Timber (Example: Broken, Deteriorated or Rotten) #8 x 1-5/8 in. #2 Phillips Bugle Head Coarse Thread Coated Exterior Screws Staple gun is not allowed #9 x 3in. #2 Phillips Bugle Head Coarse Thread Sharp Point Coated Exterior Screw ꞏ 2ft of fence post concrete for each post (If necessary) Address # 2: 2405 Newport Ave Install 1in. x 6in. x 8ft Pressure-Treated Pine Dog Ear Fence Picket Install 2in. x 4in. x 8ft Ground Contact Pressure-Treated Lumber Install 4in. x 4in. x 8ft Ground Contact Pressure-Treated Southern Yellow Pine Timber #8 x 1-5/8 in. #2 Phillips Bugle Head Coarse Thread Coated Exterior Screws Staple gun is not allowed #9 x 3in. #2 Phillips Bugle Head Coarse Thread Sharp Point Coated Exterior Screw 2ft of fence post concrete for each post Picket Fence 4x4 Timbers to be installed every 8 ft. Where Necessary, every 4x4 to have 3 Supporting 2x4’s for Pickets Dog Ears for better support. Gates to be also installed with proper hardware approved by LMH. Gates will be installed in the same place where old picket gate fence. PAINT: Following paint is to be used according to specs and scope of work any changes to be approved by LMH. Paint to be chosen by LMH. FINISHES: Paint to be on both sides. Prime and paint new materials. Use exterior semi-gloss acrylic latex paint with a 20- year warranty. Use High Performance Protective Enamel Gloss White Oil-Based Interior/Exterior Paint for Existing Poles.
