SPECIFICATIONS SHALL MEET OR EXCEED THE FOLLOWING: 3.1. Line 1 Aluminum Welded Boat with Jet Motor 3.1.1. Examples: SJX 2170 Jet Boat, RockProof River Rocket 2072, or TPWD approved equivalent. 3.1.2. Overall Length: approximately twenty (20’) to twenty-one (21’) foot, seven inches (21’7”). 3.1.3. Bottom Width: approximately Seventy (70) to seventy-two (72) inch. 3.1.4. Beam Width: approximately ninety (90) inches 3.1.5. Hull: Minimum one-eighth (1/8) inch thickness. 3.1.6. Floors and Deck Lids: Coated with bed-liner material or other non-slip surface. 3.1.7. Engine: Minimum 300 horsepower (HP) jet drive. 3.1.8. Fuel Capacity: Minimum thirty (30) gallon. 3.1.9. Battery: One (1) marine-grade battery with battery box and perko battery switch. 3.1.10. GPH Bilge System: 500-800 per gallon 3.1.11. Navigation Lighting: Must meet or exceed United States Coast Guard requirements and meet or exceed State and Federal Regulations. 3.1.12. Cable Diversion Rail: One center line arched pipe rail mounted from the bow and arch over the console and extending roughly 3 feet to the rear of it. 3.1.13. Center Console: 3.1.13.1. Center console with handrails and front storage compartment with seat cushion. 3.1.13.2. Complete multi-function instrument package. 3.1.13.3. Windshield 3.1.13.4. Single lever control Shift / Throttle combination with neutral safety switch. 3.1.13.5. Blue flashing LED lights mounted on front of the console with toggle activation switch on console...
