A. Manufacturer and Model: Amada HFA400W or approved substitute B. Maximum Rectangular Cutting Capacity: 16” x 16” minimum C. Maximum Round Cutting Capacity: 16” minimum D. Maximum Work Load Capacity: 5,600 lbs. minimum E. Saw Blade: 1. Size: 15’ x 0.050” x 1- ½” minimum 2. Speed: 56-295 feet per minute minimum 3. Tension Control: hydraulic F. Vise Control: 1. Type: Main and rear vise 2. Control: Hydraulic full-stroke cylinder G. Motor: 1. Saw Blade: 7.5 horse power (“HP”) minimum 2. Hydraulic Pump: 2 HP minimum 3. Cutting Fluid Pump: ¼ HP minimum H. Power Requirements: 1. Power Requirement: 11 kilo-volt-amperes minimum 2. Power usage limit: 208/480 Volts maximum 3. Power Supply Voltage: AC220V±10%, 3 PH, 60 Hertz (“Hz”) or AC440V±10%, 3 PH, 60 Hz minimum I. Cutting Fluid: 1. Tank Capacity: 31.7 gallons (“gal”) minimum 2. Pump Type: Manufacturer’s standard 3. Pump Capacity: 10.6 gallons per minute (“gal/min”) minimum J. Hydraulic: 1. Tank Capacity: 10.6 gal minimum 2. Pump Type: Manufacturer’s standard 3. Pump Capacity: 5.8 gal/min minimum 4. Pressure Setting: 498 pounds per square inch
