Determine all utility valves/ panels to isolate this work area for improvements, including Hot and Cold Water, 120 and 240 Voltage, as required. Remove all existing cabinets and counters. Haul out includes disposal. With approved basic shop drawings & design, fabricate New Commercial-Grade, Custom Cabinetry. a) All USA 3/4 inch Termite Treated Cabinet-Grade plywood. b) All cabinet boxes to be surfaced with laminated cabinet liner. Frosty white, Wilsonart #153-60, Matt Finish or approved substitute. c) All soft-close hardware. Cabinet doors: Blum brand, 170° opening hardware or approved substitute. d) All new cabinet doors with Wilsonart, Fusion Maple #7909-60 or approved substitute. Matt Finish laminate with 3 mil vinyl tape edges (routed with 1/8 inch radius) e) Stainless Steel door pulls. f) All key-locking cabinet doors. (18 doors - total.) g) One floor sink access cover plate. h) Solid lumber Cabinet Base/ Toe-kicks bolted to concrete. i) 2 Each (double) structural laminated 3/4 inch plywood sub top with overhang to support new Quartz Countertops for front cabinets only. j) One typical adjustable shelf, per box, including metal clips. 24" deep. k) Installation of cabinet
