The Fire Alarm System for this project shall be a Potter Electric Brand System. KCHA standard will not allow any substitutions for this specified Fire Alarm equipment. Read the accompanying documents, including the Yardley Arms Fire Alarm Replacement Assessment Report, One-line Diagram Drawings, Floor Plan Drawings, and Specifications. This specification and fire alarm drawings are the basis of the design. KCHA will require all the additional detectors and devices above the current codes and the requirements in the specification and fire alarm drawings. Provide a complete bidder design addressable fire alarm system complete but not limited to the following: fire alarm control panels, fire alarm NAC panels, remote annunciator, graphic map, AES radio with antenna, smoke detectors, surge Protectors, CO Detectors, duct detectors, heat detectors, manual pull dual stations, audio/visual notification devices including each dwelling unit areas, monitoring of sprinkler devices and pre-action systems, control of fire/smoke dampers, mechanical HVAC unit, fan, door closers, door holders, elevator, and all conduit and cabling. The contractor is responsible for all costs to have a complete operational system and any requirements of the Authority Having Jurisdiction (AHJ). Open cable installations shall use insulated mounting supports, “Bridal Rings,” “D rings,” or “J Hooks” above accessible ceilings where approved for such use. The contractor will verify actual site conditions and measurements in the field...
