Pickens County Solid Waste Horizontal Brush Grinder Specifications 1. Powertrain • Engine MUST be 1000 HP or Greater • Minimum Fuel Capacity of 300 Gallons • Minimum Hydraulic Tank capacity of 90 Gallons • Case drain filtration on each hydraulic loop to protect the overall hydraulic system in the event of a hydraulic component failure 2. Mobility • Must be a tracked machine • Fully movable by remote control • Minimum track width of 22 inches 3. Feed System • Minimum hopper capacity of 6.0 Cubic Yards • Minimum hopper width of 60 inches • Minimum Feed opening of 60 inches by 40 inches • Air Bag system or equivalent on compression roller to minimize damage to the rotor and or machine during hard grinding 4. Rotor • Up-swing for three stage grinding • Bit speed of 10,000 ft/min or less 5. Discharge • Minimum width of 60 inches • One-Piece vulcanized discharge conveyor belt • Internally sealed with skirting to minimize spillage under and around grinder 6. System Control • Adaptive feed system to monitor pressures on in-feed chains, compression roller, discharge belt, and engine RPM. Loads and adjusts feed rate to optimize production • Remote control with emergency stop – for machine operation and mobility from loading equipment 7. Servicing Vendor • Local Servicing Vendor / Maintenance / Parts Department Must be within 2 hours driving time from 2043 Old Liberty Road, Liberty, SC 29657 • On-site setup and Training Must be performed within 14 Business days of delivery
