Work under this ITB consists of furnishing all labor, materials, tools, equipment, means of transportation, and incidentals necessary to perform the services. Contractor must furnish equipment in good operating condition and operated by properly trained and qualified personnel. The Contractor must make a good faith effort to furnish the Department the fully operational equipment needed to perform Pavement Preservation and Maintenance Services at such time, and at such location(s) as directed by the Engineer. Prior to start of work, Contractor must inspect equipment to ensure the equipment is fully operational for the performance of its intended purpose. THIS CONTRACT CONSISTS OF MILLING AND INLAY OF 12.5 MM SUPERPAVE ON SR 11 IN BERRIEN COUNTY. THE PROJECT BEGINS 130 FT. SOUTH OF JCT OF SR 11 AND FOUNTAIN ST. C/L. AT BEGINNING OF RT. TURN LANE., LOG MILE 0.000 (MM. 11.34),(GPS COORDINATES 31.19665 N. 83.25142 W.) AND ENDING 143 FT. NORTH OF JCT OF SR 11 AND HALL AVE. C/L., LOG MILE 1.170 (MM. 12.51),(GPS COORDINATES 31.21355 N. 83.24944 W.). BEGIN VARIABLE DEPTH MILLING (TYPICALLY 1 ½ INCHES) TO MAINTAIN EXISTING ROADWAY PROFILE AND ALLOW FOR SMOOTH TRANSITION. BEGIN FULL WIDTH INLAY OF 12.5 MM SUPERPAVE AT 165 LBS. PER SQUARE YARD. BEGIN RE-STRIPING ROADWAY AS EXISTING WITH THE EXCEPTION OF INCREASING AND/OR MAINTAINING 12 FT. TRAVEL LANES THROUGHOUT THE PROJECT WHERE APPLICABLE. BEGIN REPLACING RPM’s AS REQUIRED. BEGIN INSTALLATION OF LOOP DETECTION.
