ITEM #1L – Piner MS Serving Counter CounterCraft Model No. SCOL - 348 - Continuous piece ‘fully enclosed base’ style construction with utility chase within counter. All electrical conduit and plumbing to be located within utility chase as required. Utility chase to be fully accessible from operator side of counter with electrical and plumbing to be located removable stainless-steel panels. - 14 gauge stainless-steel counter top with #8 high polished edges, turndown at all free sides. Countertops to be 34" AFF. - Stainless-steel swirl trayslide, 32" AFF. - LED front panel down-lighting, remote on/off switch. - Counter front to consist of removable plastic laminate clad millwork decor panels, stainless-steel body reveal between panels. Color selection by owner/architect. - Fully welded angle iron frame utilizing 1.5" x 1.5" x 1/8" galvanized angle. Welds to be ground smooth and sprayed with silver enamel paint. Angle Iron to be framed around each cutout for drop-in-equipment. Angle iron to run frontto-back and at each mullion. 1/2" sound deadening tape to be applied to top of angle iron frame prior to installation of countertop. - All stainless-steel fabrication to be fully welded. Butt or knuckle joints will not be accepted. All tops to be true radius, no chamfering. - Stainless steel internal shelving compartments, fully enclosed back, sides, and top. Removable rear access panels, removable top panel, coved corners All internal stainless-steel fabrication to be fully welded. - One (1) lot custom CounterCraft breath guards, optimized for use with CounterCraft Connected Control System, stainless steel 1.25” square posts with #8 high polish accents, posts extend through the top securing to angle iron frame within counter body, 3/8” tempered glass front panel and serving shelf, glass to have high polish profiled edges with rounded corners, single tier over hot food section, dual tier over cold food section, includes heat and LED lights, NSF compliant. - 48" pass thru with load center underneath (recessed to trayslide height). - Includes one stainless-steel fold down worker's shelf to run the length of the waterless wells. - Two (2) stainless-steel perforated cylinders, recessed in trayslide near pos system. - Includes five (5) each drop-in waterless hot food well, optimized for use with CounterCraft Connected Control System, stainless steel construction, easy lift out for easy access and fast service, no drain connection required, includes removable non-stick pan liner to facilitate cleaning. - One (1) each drop-in HotFrost shelf, optimized for use with CounterCraft Connected Control System, convertible unit (Hot or Frost), recessed for use with 18x26 sheet pans, all stainless-steel construction. - Includes one (1) each drop-in Glass HotFrost Overshelf, optimized for use with CounterCraft Connected Control System, full function capability (Hot or Frost), recessed for use with 18x26 sheet pans, all stainless-steel construction, unit located in glass intermediate shelf of breath guard per plans. - Includes provisions only for RPI refrigerated merchandiser, model number to be verified. - One (1) each Silver King drop-in ice cream unit with lock bar. - All electrical to be interwired to load center. Electrical to be located in electrical conduit pipe, flex conduit to be kept to a minimum. Exposed flex conduit will not be accepted. All wiring to be numbered at all junctions, per circuit. Wiring diagram to be provided at each load center door. All receptacles mounted in the counter to be recess mounted and labeled. -One (1) lot plumbing and load center compartments. Plumbing lines are to be 3/4" copper. All copper lines to be coated to protect from corrosion. Unions to utilize compression fittings, no soldering is permissible. Manifolded drains lead to single 3/4" turn ball valve mounted in full stainless-steel housing. Drain valve to be located on operator side for ease of access. - Custom control panel containing remote mounted controls for drop-in equipment (i.e. hot food wells, cold pans, etc), custom CounterCraft labeling and switches. - All drains pre-plumbed, as required. - Integral cashier station with locking cash drawer. - Stainless steel legs and adjustable bullet feet. - Stainless steel removable kickplate. - CounterCraft delivery and assembly services.
