SCOPE OF WORK OVERVIEW AND PURPOSE: Remove and replace armory door motors, install new operators, refit doors to new operators. SUPPLIES AND/OR SERVICES REQUIRED: Remove and reinstall two armory doors. Each of the doors measure 40 inches wide by 78 inches tall and the door openings measure 36 inches wide and 80 inches tall. Remove and dispose of existing motors/operators on the two armory doors. Install new motors/operators on the two armory doors. Operators are located above each door; they consist of a motor and gear drive for each door to slide doors open and shut. The control panel for each of the two operators is in the facility armory. There are several end switches in the operators that control the travel of the door. Ensure the operators are connected to controls in the Armory and work correctly. Refit armory doors to the new operators.
