• Remove and dispose of all trash in the work area prior to commencing work. Contractor must be mindful of potential hazardous materials at the worksite. • Remove enough vegetation to make space available for fencing. The method of vegetation removal is at the contractor’s discretion. • Remove and replace approximately 54’ of fencing, a 12’ long gate, and install approximately 39’ of new fencing. o Fencing must be McNichols® expanded metal, flattened, galvanized, hot dipped, mill finish, ¾” No. 9 flattened, 0.923” Short Way of Design (SWD), 2.100” Long Way of Design (LWD), Long Way of Opening (LWO) parallel to the length of the sheet, 64% open area, 48” width x 120” length. o Barbed wire must be single coil helical, wire-reinforced: ▪ 18” 450mm diameter. ▪ 33 coil loops. ▪ Stainless steel strip material. ▪ Galvanized core wire. ▪ 18” 450mm loop spacing. ▪ #2 ASTM F 1910 item. o Includes all required rails, posts, tension wire, brackets, and hardware as required for installation. ▪ 3” gate posts, 11 gauge, 24’ long. ▪ 2” line and corner posts, 14 gauge, 24’ long. ▪ 2” frame. ▪ 30” deep. ▪ 8’ high. ▪ 9’ 3” total height with barbwire.
