Hydraulically track driven with skid steer activation steering with hydraulic width track adjustment to allow machine to pass through a 36” gate opening Rubber tracks are to be made out of the non-marring grey color type Hydraulic radial outriggers with holding valves and motion alarms Minimum 3,800 pound boom lifting capacity all cylinders to have integral holding valves Minimum sheave height of 38’ One (1) 8’ insulated material handling jib with mounting hardware One (1) 4’ insulated personal jib with mounting hardware Ability to perform simultaneous material handling functions with the bucket attached to the end of the boom 300# capacity pin on 24” x 24” x 42” bucket with bucket brake, inside outside step and cover – NO liner Pin on hydraulically actuated tilt and open/close pole guides at boom tip with boom tip flares 46KV category C boom with ½” material handling rope for the rated capacity with hook and down haul weight 2,500 foot-pound single speed fully proportional digger with an 18” auger with carbide teeth and a 2” Kelly bar. Auger to stow on side of boom Auger attachment to be transferrable from main boom to the end of 2nd stage without disconnecting hoses
