1. Body Construction 1.1. Frame constructed of angular steel able to support 650 lbs. 1.2. Dimensions 1.2.1. Length: 48” 1.2.2. Width: 30” (side to side) 1.2.3. Height: 43” 1.3. Wheels 1.3.1. 10” airless type front wheels 1.3.2. Bolt to heavy duty hubs, 1” Timken bearings 1.3.3. Heavy duty rear swivel caster with foot actuated straight track locking mechanism 1.4. Pointer guide 1.4.1. Front mounted 1.4.2. Adjustable for each die size 1.4.3. Plated steel for corrosion protection 1.5. Tool kit supplied with unit 2. Heating System 2.1. 20 lb. propane cylinder, system regulator and related hoses for LPG systems 2.2. Shut‐off valve on propane bottle 2.3. System to provide propane fuel to the main burner and stainless steel jet burners on the applicator and extrusion dies 2.4. High pressure liquid propane fuel system 2.5. Minimum operating pressure 4 – 7 PSI 2.6. 75,000BTU 2.7. System furnished with all necessary safety features, connections, fuel lines, regulators, etc. for connection to a propane cylinder 2.8. Automatic Ignitor for main burner 2.9. Equipped with a hand torch for safe lighting of burners, inspection door in material tank for lighting ...
