SPECIFICATIONS: - 6 Compressor-Assisted Solids Handling Pump - ENVIROPRIME SYSTEM with compressor - 6 pump with camlock fittings - Trailer mounter diesel pump with ball coupler, TRAILER TO BE INCLUDED IN UNIT COST - Electric brakes - Trailer light package - Pump Casing: 65-45-12 ductile iron, tangential discharge, clockwise rotation, back pullout design - Impeller: 65-45-12 ductile iron, closed or semi-open, 2-vane, 3 solids handling, balanced, 9.5 diameter - Mechanical Seal: Grease or oil lubricated, single component type, Tungsten Carbide vs Silicon Carbide faces, Viton elastomers - Shaft: Modified SAE 1144 stress-proof steel - Bearings & Frame: Grease or oil lubricated 6316 deep groove ball bearings, Class 30 Cast Iron with cooling fins, mounting tabs - Suction Size: 6 in (15.24 cm) - Discharge Size: 6 in (15.24 cm) - Maximum Flow Capacity: 2450gpm (556.15 m/h) - Maximum Head: 120 ft (36.58 m) - Maximum Solids Handling: 3 in (7.62 cm) - Maximum Operating Speed: 2000 rpm - Maximum Operating Temp.: 200 F (93.33 C) - Maximum Operating Pressure: 51.9 psi (358.17 kPa) - Approximate Dry Weight: 4100lbs (1859.73 kg) - Fuel Tank: 100 gal (378.54 L) - Fuel Consumption @ 2000 rpm: 2.88 gph (10.9 L/h) - Best Efficiency Point: 80% - Maximum Operating Times: 34 hours @ 2000 rpm, 0.396 lb/hp-hr 44 hours @ 1800 rpm, 0.386 lb/hp-hr 58 hours @ 1600 rpm, 0.372 lb/hp-hr - Engine Model: Isuzu 4LE2T, 40 HP @ 1800 rpm - Standard Equipment: Cooled EGR, Wastegate Turbocharger, emission control device, alternator, radiator - Type: EPA Final Tier 4, In-Line 4-Cycle, Turbocharged, high-pressure common-rail diesel - Automatic Shutdowns: Low lube oil pressure, high water temperature. - 12-month Warranty - Vendor shall deliver the pump and conduct on-site training. Training of 3 Personnel
