1. Demolition and Removal: 1. Remove and Dispose of 7 single swing doors and frames, and 1 double door with frame. 2. Contractor is responsible for off site disposal of all materials. 2. Installation: 1. Supply and install new door frames and slabs, ensuring compatibility with existing openings. 2. Contractor to measure and verify all door and frame dimensions on-site. 3. Provide two material options for pricing: 1. Fiberglass frames and door slabs. 2. Galvanized metal frames and door slabs. 4. Sandy City Facilities will reinstall existing electronic door access hardware. 1. Contractor is responsible to ensure wiring is not damaged and is routed correctly during demolition and installation phases. 3. Hardware Installation: 1. Provide and Install: 1. 9 Door Closers: LCN 4040XP Heavy-Duty Closers. 2. 7 Level Sets: Corbin Russwin 3851 NZD 626. 3. 2 Crash Bars: Von Duprin 99 4. 2 Crash Bar Trim Kits: Von Dubrin 99L - 98/99 Series Exit Devices - Lever Trim 5. Hinges: Heavy duty hinges color code 626 satin chrome. 6. 5 Electronic Door Strike Prep: Where applicable frames and existing electronic door access will need to be prepped for Folger Adams 712 strike 7. Smoke Seal: All doors 8. 5 Doors will need pick plates 9. Sandy City will provide cores for lever sets and crash bars 10. 9 kick plates 11. 9 drop down hold open door kicks 12. Light Kits and Glass with Wire: 2 doors will have small light kits installed approximately 7"x22" 13. Threshold: all doors to have threshold 14. Door Sweep: all doors, less the bunker double doors, to have door sweep with neoprene insert
