a. Length: 48’ with overall minimum load dimension of 48’ x 100” x 87 ½” for a 107.5 cubic yard water level load capacity. b. Floor: Keith #2631 9V high impact hydraulically operated two-way aluminum floor with steel tips and 3.5” drive cylinders. c. Floor Controls: Manual controls located mid-body on driver’s side. d. Bottom Rail: Extruded 6061-T6 aluminum, Z-section design is 5-1/4” wide, .240” thick with 5- 3/4” face and 2” wide groove for conspicuity tape. Continuously welded to side sheet. Stringer plated added for extra strength to bottom rail. e. Longitudinals: 10” 6061-T6 extruded aluminum “I” beams from the rear of trailer, forward 20’. f. Crossmembers: 5-1/4” 6061-T6 extruded aluminum “I” beams spaced on 12” centers. g. Fifth Wheel Plate Assembly: 3/8” steel plate with 2” SAE pin set at 36”. Supported with three (3) 5” steel I-beam cross-members and wrapped in 5” wide stainless steel band. Assembly is Huckbolted into bottom rails and bulkhead. h. Sides: 100” solid sides of .190” 5454-H34 aluminum sheet. Extends from bulkhead to rear pocket. i. Top Rail: Heavy duty 9” x 5-1/2” 6061-T6 (or equal) extruded aluminum. Top is 5/8” thick and the sides are 3/8” thick. Extends full length from bulkhead to rear pockets. j. Crosspipes: Two (2) steel crosspipes 3” x 3” x ¼” wa. Bolted to the top rail. One at center of trailer, one at rear of trailer. Red reflective tape taped to the toprail sides to mark location of the crosspipes. Crosspipes painted orange.
