Engine 2 yes_ no_ Engine meets EPA Final Tier 4 and European Union Stage IV standards 3 yes_ no_ The engine shall have dual safety air cleaner elements, radial seal, dry type Engine shall have a wet-sleeve cylinder liner design for improved cylinder cooling over dry sleeve and cast-in-bore design and 4 yes_ no_ for improved cylinder and piston ring durability. Engine shall be a turbo-charged, direct injection, four stroke, 6-cylinder diesel engine with 4 valves per cylinder designed and 6 yes_ no_ built by the manufacturer 7 yes_ no_ Engine displacement for standard engine shall be no less than 9.0 liters (548 cu. in.) Engine shall reach no less than SAE net horsepower in the gears 1-8: 8 yes_ no_ 1st 210hp, 2nd 225hp, 3rd 240hp, 4th 250hp, 5th 255hp, 6th 265hp, 7th 275hp, 8th 265hp; 6WD is active in gears 1-7 onl 9 yes_ no_ Engine will have a minimum torque rise of 55% in all gears Unit shall be equipped with Engine Power Management System for variable horsepower for up to 265 SAE net and shall meet 11 yes_ no_ FT4 standards 12 yes_ no_ Ether starting aid must automatically meter ether injection to prevent engine damage. Machine shall be equipped with electronic over-speed protection to prevent the engine and transmission from over speeding, as 13 yes_ no_ a standard feature. Electronic Throttle Control (cruise control) shall be available, and shall be controlled by a switch, located on the right-hand 14 yes_ no_ console for resuming and decreasing throttle set. 15 yes_ no_ Unit shall be equipped with engine stall prevention (ESP) as standard equipment
