1 This contractor shall furnish and install but not limited to all architectural woodwork, solid surfaces, benches, refinish and repair handrails, plastic laminates, wood wall panels, and desks and casework. 2 This contractor to provide all back splashes where identified on contract drawings. 3 Contractor to provide and install all fasteners in accordance with the drawings and specifications. 4 This contractor shall lead coordination with plumbing contractor for under-sink piping and fittings so that the casework encloses plumbing systems and maintains all required clearances. 5 This contractor shall furnish and install all required accessories required for a neat, clean, final product that is installed in a neat and workman like manner. This includes but not limited to all shims, fasteners, anchors, washers, beauty rings, grommets, etc. 6 This contractor shall install existing salvaged carved wood panels at locations shown within the construction drawings. This contractor shall coordinate with contractor storing materials before installation. These wood panels are stored on site, and this contractor is responsible for all transport of the materials from the storage area to the installation area. 7 This contractor shall provide all wood panel doors and hardware accessories for the casework or other architectural woodwork elements. 8 This contractor shall furnish and install all wood panels along with all mounting requirements and necessary wall blocking. 9 This contractor shall repair and refinish wood handrails where it is identified in the contract documents. 10 This contractor to install all new wooden handrails in accordance with the construction drawings and specifications.
