Work under this scope of work (SOW) is under the jurisdiction of the CHP, who will execute the contract documents, coordinate with Contractor as necessary and conduct inspections to ensure the work is conducted in strict accordance with the SOW. No deviations from the SOW will be permitted without concurrence by the CHP Facilities Coordinator. A. Remove and replace deteriorating gutter, down spouts, and approximately three (3) feet of damaged roofing around the perimeter of the building. B. Expose the plywood deck and replace plywood where dry rot is present. This is to include fascia, shiplap, rafters, lookouts, freeze blocks, slats, etc. All woodwork is to be primed and painted. C. Clean entire roof of debris, clean out all gutters and downspouts and ensure all mold growth is properly removed. D. Once flat roof is cleaned, apply one layer of Perma-Dri or equal rubber roof patch to the entire flat roof area that was repaired feathering into existing roofing material. E. Contractor is solely responsible for all measurements. F. Ensure roof slope to drains by building up roof deck if applicable. G. Properly reinforce all internal drains, as needed, to promote proper slope and drainage. H. Copings, counter flashing, and other metal work shall be fastened to resist wind uplift and prevent buckling. Metal should be sealed to prevent moisture infiltration. I. Product delivery, storage, and handling: deliver materials to the job site in original, unopened containers, with the manufacturer's name, brand name and installation instructions.
