3200 LNFT FEDERAL: Furnish (1) Modified Rotary Drill, truck or track mounted with operator to drill 7" TO 10" diameter holes in soil and rock to install (in place) steel railroad rails up to 39 feet in length and weighing up to 140 lbs per linear yard. Rotary Drill must have capability of drilling holes that are offset a minimum of five (5) feet from the edge of the truck tire or track (if track mounted) to the center of the hole. Drill rig must be capable of handling steel railroad rail up to 39 feet in length. Drill rig should be powered by motor of 130 horsepower or greater with at least 16,000 lbs. pulldown pressure and a 300 CFM or greater air compressor. Drill rig must be capable of drilling from either side or back of carrier. Drill must have capability of drilling a maximum of forty (40) foot holes from elevation of roads. 2600 LNFT FEDERAL: Vendor to provide used railroad rail To be completed as stated in the extended description line 1 with the vendor providing the necessary used railroad rail. The vendor shall submit a certification stating that all manufacturing processes involved with the production of steel or iron materials occurred in the United States. The attached recycle content form must be submitted with the bid. 40000 LNFT FHWA: Offset Drill w/oper Vend. provide rail and traff ctrl
