RIBCRAFT Model 6.5 Rigid Inflatable Boat (21 feet 5 inches long), configured as follows: Length/Measurements • LOA: 21'5" • Beam: 8'5" • Internal Length: 16'4" • Internal Beam: 5'6" • Weight: 1,250 lbs – 1,800 lbs (approx.)(without engine) • Rated for 12 people Hull Construction • Solid FRP (fiberglass) hull, with internal liner. • Longitudinal & transverse composite stringer system • Inorganic materials to be used in construction only, no wood. • Dead rise 25 aft to 44 forward at cutwater • Multiple full-length solid fiberglass lifting strakes • Heavy duty industrial molded non-skid deck with removable deck panel for complete fuel tank access • Gelcoat color: Light Grey • All wires to be run underdeck via underdeck wire conduit Tube Construction • Tube must be constructed of 1670 dtx Hypalon and be air filled. • 5 independent air chambers and 5 pressure relief valves (one for each chamber) • All seams to be triple bonded, overlapped and reinforced with internal and external seam tapes. • 20” diameter tubes required • Heavy-duty external lifelines to be mounted on outside of tube. Top of tube to be free of lifelines. (no lacing cuffs)
