Right-of-Way Mowing (Type 2): Mow all areas outside (beyond) the edge of the shoulder or the edge of the pavement along the roadway and along the ramps of interchanges extending to a minimum width of fifteen feet or width of a batwing mower, whichever is greater Mow all bi-furcated medians, where the roadway separates beyond the normal median width, on all areas inside (beyond) the edge of the median shoulder or the edge of the median pavement along the roadway and extending to a minimum width of fifteen feet. Mow the following areas: a) Shoulders, medians, and slopes that are 3:1 or flatter, when they are within the fifteen feet area; b) Five feet up the back-slope on areas adjacent to the roadway on both the median (inside) and the outside cut slope areas beginning at the bottom of the roadway ditch and extending up the slope to a point five feet from the beginning; c) Five feet over fill slopes steeper than 3:1 located adjacent to the roadway shoulder, when they are within the fifteen feet area; d) Two feet over the edges of paved and rock-lined ditches, when they are within the fifteen feet area; e) Contractor shall mow full median width if an area 12’ wide or less remains following the mowing of both median shoulders...
