a. MAXIMUM PLATFORM HEIGHT: 33’ (10.06m) b. TRAVEL HEIGHT: 11’ (3.35m) – may vary depending on chassis. c. SIDE EXTENSIONS: (4) four electrically actuated individual sliders with 48” inches of travel on the left side of the platform. A limit switch will be installed to prevent the unit from being lowered without the sliders being fully retracted. d. LIFT PLATFORM: 84” (2.13m) wide x 180” (4.57m) long. Hydraulic actuated rear traverse to the rear of the truck 8’ (2.44m). Platform fitted with 4 recessed lanyard attachment points in the floor. Made with a tube and I-Beam construction. e. GUARDRAILS: 39” (0.99m) high, pinned, removable guardrails with 4” (0.1m) toe boards surrounding the platform. f. PLATFORM CAPACITY: 2,000 lbs. (907 kg). g. CONTROL CENTER: Platform: Control center is attached to guard rail. Fixed box has ignition switch, emergency stop button as well as raise and lower controls and traverse in/out. Base: Control center provides raise and lowering function along with hydraulic stabilizer controls, emergency stop switch, enable and traverse. Emergency: Back up emergency controls are located at the base and can be used to lower the unit, raise stabilizers and retract the platform (if applicable).
