• Remove and dispose of the existing fencing, 70-ton chiller, and its identified components, following environmental and safety regulations. • Furnish and install a new air-cooled chiller and necessary components that include voltage protection, piping, insulation, strainer, stands, flow indication, filters, dryers, valves, flanges, gauges, fittings, electrical, signage, coil corrosion coating(s), taps for supply and return with appropriate valves for potential futuristic temporary chiller hookup, following the manufactures instructions. Accepted manufactures include Trane, Carrier or York. • The Contractor may use the existing disconnects if permissible. • The existing controls will be disconnected by the Owner. Reconnection shall be the Contractors responsibility to coordinate with Envirocon, at the Contractors expense. • Balance, calibrate and perform start up to achieve optimal efficiency and performance. • Provide all documentation and submittals, including any drawings, required clearances, location of field connections, manuals, warranty, and maintenance schedules. • Provide one onsite training session to appropriate staff for maintenance and operation of the new chiller. • Provide a one-year warranty that includes any and all parts and labor. Post-installation warranty response time shall be within a 24-hour period after initial contact by the Owner. • Provide an additional five-year part only warranty.
