Boat Requirements 1. Must be shallow drafting (<10 inches) 18-foot boat, semi-V front to flat bottom hull designs, all welded marine grade aluminum hull construction with a hull thickness between 0.125- 0.250 inches. 2. All boat wiring should be easily accessible for maintenance. 3. Center or side console design/operation, with operator seat/wheel. From the console all systems must be visible/accessible. The controls for the e-fisher pulsator system and for boat operation, including kill switch for electrofishing system and other controls (livewell pump, lights, bilge) must be at the console. 4. A single 10” MFD flush-mounted and interfaced via NMEA2000 to the engine and other data sources for display (e.g., voltage, fuel level, hours, temperature, depth, etc.) is preferred over a large number of analog gauges. 5. Console has all electrofishing pulsator instrumentation panels available/visible for adjusting settings and monitoring outputs...