1. Site Preparation - Tree Clearing and Removal: Remove all trees, brush, and vegetation within the designated project area. Dispose of debris off-site in compliance with environmental and local regulations. Safety Requirements: Use proper personal protective equipment (PPE), including helmets, gloves, eye protection, and steel-toe boots. Implement a tree-felling safety plan, ensuring proper control of equipment and falling direction. Monitor the site for hazards such as uneven terrain, overhead lines, or wildlife. Site Preparation for Foundation and Cabinet Pad: Grade and level the site to establish a stable working surface. Excavate to the required depth for the tower foundation and cabinet pad. Safety Requirements: Mark and barricade excavation zones to prevent unauthorized entry. Conduct trenching and excavation safety checks (OSHA 29 CFR 1926 Subpart P). Use equipment with roll-over protection systems (ROPS) and seat belts. 2. Installation of Foundation and Cabinet Pad - Construct concrete foundations for the telecom tower and Communications Equipment Cabinet pad. Ensure foundations meet engineering specifications. Safety Requirements: Use PPE, including high-visibility vests, safety goggles, and gloves. Follow proper concrete mixing and pouring procedures to prevent splashes and burns. Ensure safe lifting practices for rebar, forms, and other heavy materials. Implement fall protection measures for elevated work (OSHA 29 CFR 1926 Subpart M). 3. Telecom Tower Installation - Construct a 140’ self-supporting telecommunications tower per Owner-supplied, engineer-stamped designs. Safety Requirements: Conduct a pre-installation safety briefing to review risks, procedures, and emergency plans. Use fall protection systems (harnesses, lifelines, lanyards) for all work at heights exceeding 6 feet. Ensure all lifting equipment (cranes, hoists) is inspected and certified for use. Follow OSHA guidelines for tower erection (OSHA 29 CFR 1910.268). Secure the work area with barriers and signage to restrict unauthorized access...