Description. This work shall consist of coordinating, furnishing, installing, maintaining, monitoring, relocating, and removing all traffic control devices necessary for the purpose of regulating, warning, or directing traffic as shown in the plans. This work shall include payment for Standards 701401, 701402, 701406, 701411, 701421, 701446, 701451, 701456, 701502, 701602, 701701, and 701801 and all items not covered by other highway standards or other pay items. This work shall be completed in accordance with Article 107.14 and Section 701 of the Standard Specifications for Road and Bridge Construction; the plans; all applicable highway standards, the special provisions, and as specified herein. Items shall include, but are not limited to, temporary and permanent signs, drums, barricades, and all other equipment, hardware, and labor necessary to maintain the lane shifts and/or closures. The Contractor will be required to install, maintain, remove, and relocate traffic control items numerous times as shown on the plans or as directed by the Engineer. Items such as temporary pavement, concrete barrier, pavement marking, removal of pavement markings, and impact attenuators will be paid for separately. The plan details present a plan for implementing the necessary traffic control for this work. The plans do not attempt to detail or define all construction conditions which may require additional installation of traffic control items to meet unforeseen needs. The Contractor may revise or modify the traffic control as shown in the plans to address any unforeseen needs upon written permission of the Engineer. Existing regulatory traffic signage shall be removed or covered as needed. The Contractor shall furnish, install, and maintain all temporary signage as specified in the plans and highway standards. This work will not be paid for separately but will be governed by Article 107.25.
