Services: The following services shall be performed to comply with the herein before specified standard: Cleaning Toilet Rooms - This work includes cleaning all plumbing fixtures, lavatories, toilet bowls, dispensers, light fixtures, doors, and stall partitions as required, and filling all paper/soap dispensers as needed. Floors shall be dry-swept and damp mopped daily using a germicide. 8 Sweeping - All tile, wood, or concrete floors, stairways, landings, and stoops shall be swept with brush or mop or mechanical brush-vacuum sweeping without damage or disfigurement of furniture, doors, or base trim. Dust, dirt, and debris shall be removed. Reset furniture upon completion of sweeping. Vacuuming - Carpeting and furniture shall be vacuumed and the dirt, dust and debris removed. Spots shall be removed from rugs and carpets as they occur. Carpet Shampooing - Carpeting shall be cleaned by self-contained equipment using cleaning solution. Damp Mopping Floors - Damp mop all resilient tile floors, ceramic tile, and concrete floors, including stairs and landings, using cotton or sponge mops, appropriate stain removal agents, and heated water, detergent and/or germicide. Buffing - All finished floors shall be buffed periodically to remove traffic marks, heavy soil, etc., to be followed by sweeping, vacuuming, or dust mopping to pick up loose residue. This is not machine buffing. Turned Out Lights - Turn off all lights when not in use. Only specific areas being worked in will be illuminated. Dusting Horizontal Surfaces Other Than Furniture, Fixtures, and Equipment - Dust with treated dust cloth or vacuum all horizontal surfaces of windows, window ledges, radiators, stair rails, baseboards, tops of panels, and other horizontal surfaces. Glass Cleaning - Clean all mirrors, glass cases, desktops, windows and glass at building entrances using plain water or cleaning solution prepared for the purpose. Adjacent trim shall be wiped clean with a damp cloth. Metal Cleaning and Polishing - Hardware, bars on doors, kick plates, and all other bright work shall be polished using approved polishing compound. Dusting Interior Walls and Ceilings - What can be reached with a broom shall be dusted, well as exposed overhead pipes and equipment with untreated dusters or by vacuuming. Cobwebs shall also be removed. Cleaning Doors and Trim - Clean doors and adjacent trim not otherwise cleaned. Empty Recycling Bins – Empty all recycle bins, when recycling program is practiced, located in corridors and other areas where specifically noted and remove recycled (paper, cardboard, etc.) items from building or deposit in collection facility/area provided for this purpose. Empty Waste Receptacles - Empty all waste receptacles located in corridors, offices and other areas where specifically noted and remove trash from building and deposit in collection facilities provided for this purpose. Washing Waste Receptacles - Wash all waste receptacles to keep in sanitary condition as needed. Washing shall be accomplished with brush and detergent solution. Receptacles will be left free of deposits, dirt, and streaks. Cleaning and Polishing Furniture - Wood and finished metal surfaces shall receive furniture polish with rubbing as necessary for cleaning, followed by polishing with a clean, dry cloth or electric buffer. Leather coverings shall be thoroughly cleaned with a combination cleaner and polish followed by polishing with a clean, dry cloth. When cleaned or polished, all surfaces shall be of uniform appearance, free of deposits, streaks, or film. All spillages shall be wiped clean with a damp cloth. Mat Cleaning - Remove mats at entrances and remove all dirt and dust deposits underneath. Clean mats and replace in proper location.
