Capacity: 18 gallons/63 pounds Material: The containers must be manufactured from high-density polyethylene resin along with a minimum of 10% post-consumer material. U.V. Stabilizer: The containers must be stabilized against ultraviolet rays with color pigment and ultraviolet inhibitor compounded at a minimum of 2% by weight. Container Thickness: Wall .090 inches Minimum Bottom .100 inches Minimum Weight: 4.4lbs maximum Nesting/Stacking: Containers must be capable of being nested inside one another for shipping and storing at a minimum ration of 5.5 to 1 and 200 bins per pallet. Containers must also be cross stacked for use in multi-bin systems. Dimensions: Length Width Height Exterior Top 25.25” X 17.60” X 13.50” Interior Bottom 20.25” X 14.00” X 13.00” Construction: Containers manufactured by the injection-molded process is preferred but others will be considered. The interior surface shall be smooth. The handles shall be rounded, reinforced, and Integrally molded into the container width sides. The handles shall be of adequate size to handle a gloved hand of any size.
