Non- Incentivized Mattresses: o Outer cover constructed of heavy-duty, 3-ply vinyl, with a cut and tearresistant scrim middle layer; o Double-needle, lock-stitch-sewn seam with heavy-gauge nylon thread; o Fluid and stain-resistant cover, which is easy to clean and disinfect; o Clear outer cover; o Core constructed with 90% cotton fibers encased in an inner cotton cover; and o Be the size 30" x 75" x 4". o Newly introduced mattresses shall have a char length not exceeding 2 in.(51mm) when tested in accordance with 16 CFR 1632, “ Standard for the Flammability of Mattresses and Mattress Pads”. o Mattresses shall comply with Standard Sidewall Spacing Rule (SSSR) 10.3.3.2.1 or 10.3.3.2.2 unless the mattress is located in a building protected throughout by an approved automatic sprinkler system. o The mattress shall have limited rates of heat release when tested in accordance with ASTM E1590, Standard test method for Fire Testing of Mattresses, as follows: o The peak rate of heat release for the single mattress shall not exceed 100 k.w. o The total heat released by the mattress during the first 10 minutes of the test shall not exceed 25 MJ. o The Mattress shall have a mass loss not exceeding 15 percent when tested in accordance with the fire test in appendix A3 of ASTM F1085, Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels. o When tests are conducted in accordance with SSSR 10.3.3.2, the formation of flaming droplets during the test shall be reported.; Incentivized Mattresses: o Vinyl, Light Green: 14 ounce double coated institutional protective fabric, antimicrobial and antifungal anti-static, crack-resistant, non-allergenic, fluid proof, wipe clean, and odor-free Flame Retardant(California Std. 117, 19-1237 and 121) (NFPA 701-2015 test 1 small) 5.25" o Cumuflex Core: 5.25" Densified Poly Fiber 10 ounce, plus 3" of 12 oz Densified Poly Fiber +/-7%, 100% polyester fibers, mold and mildew resistant, moisture resistant, hypo-allergenic, non-toxic and odor free, Flame Retardant (California Std. 117) o Thread: Tex 45 Anefil Nylon Bonded. o Construction Details: Vinyl cover constructed using a double stitch seam, including end closure. o Flammability: Completed mattress meets Federal Flame Retardant Code 16 CFR Part 1633 Test Standards. o Newly introduced mattresses shall have a char length not exceeding 2 in.(51mm) when tested in accordance with 16 CFR 1632, “ Standard for the Flammability of Mattresses and Mattress Pads”. o Mattresses shall comply with Standard Sidewall Spacing Rule (SSSR) 10.3.3.2.1 or 10.3.3.2.2 unless the mattress is located in a building protected throughout by an approved automatic sprinkler system. o The mattress shall have limited rates of heat release when tested in accordance with ASTM E1590, Standard test method for Fire Testing of Mattresses, as follows: o The peak rate of heat release for the single mattress shall not exceed 100 k.w. o The total heat released by the mattress during the first 10 minutes of the test shall not exceed 25 MJ. o The Mattress shall have a mass loss not exceeding 15 percent when tested in accordance with the fire test in appendix A3 of ASTM F1085, Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels. o When tests are conducted in accordance with SSSR 10.3.3.2, the formation of flaming droplets during the test shall be reported.; Pillows: • Must be separate from mattress; • Standard sized, measuring 20" x 26"; • Outer cover constructed of heavy-duty, 3-ply vinyl, with a cut and tear resistant scrim middle layer; • Fluid and stain resistant cover, which is easy to clean and disinfect; • Clear outer cover clear in color; and • Cotton core with fire resistance cover and filling to include tickling with outer clear cover.
